How to choose a crib for a newborn - what cribs are like

At first, a newborn spends much more time in a state of sleep than awake (how long does a newborn baby sleep). During this period, the analysis and assimilation of all new information that the baby received takes place. This is why it is so important to create the conditions for a restful, full sleep for the newborn. To do this, first of all, the child will need a cozy bed where it would be comfortable to sleep. Despite the fact that there is a huge amount of information about them today, many young mothers continue to be interested in questions: how to choose the right crib for a newborn baby, does it need wheels, does it need a built-in box and others. Let's deal with them.

Choosing the right bed!

Safety requirements for a crib for a newborn.

Regardless of the type in the crib for a newborn:

There should be no protrusions or sharp corners so that the baby does not hit them, as well as unreliable latches, because of which you can pinch your finger.
Contrary to the opinion that the crib should be exclusively wooden, pediatricians now suggest considering metal models as an alternative. After all, most wooden beds are varnished to avoid drying out and breakage of parts. If you nevertheless decide to buy a wood product, then it is worth checking with the seller with what varnish or paint it is coated, and even better, so that special linings made of non-toxic materials are present on the surfaces that the baby can gnaw with the appearance of teeth.
The bottom and sides should not be solid to ensure good air ventilation in the bed itself and under the mattress.
The bars on the sides should not be too frequent so that the child's leg or hand does not get stuck between them. Also, they should not be too rare so that the baby does not try to stick his head through them. The optimal width between them is considered to be 7-8 centimeters.
Another requirement is a removable wall. It cannot be called obligatory, but such a detail can greatly facilitate the life of a mother at night if the bed with the front wall removed is moved close to the adult.
Also an additional, but not mandatory requirement is the presence of two levels of the bottom of the crib. Then you can easily lay the newborn on the bed higher, and when the child grows up and begins to try to get out of the crib, then the level of the bed can be lowered.

If you are hesitant about which crib to choose for your newborn, then the following overview of the different crib models may be helpful. Choosing the right model will mainly come down to what features you would like to see in it.

Cradle beds or separate carrycots

These cradles seem to be specially invented so that a tiny and defenseless baby is surrounded by the maximum amount of warmth and comfort. They are most often made from hypoallergenic breathable materials (for example, willow vines). They are small in size, and the space of the newborn is very limited (like in a mother's belly), which creates a feeling of additional protection for him. Plus, they can be easily moved wherever you need them, as many models are not only lightweight in their own right, but also equipped with casters. Well-known manufacturers complete their cradle beds with a mattress, a canopy (as an option - a mosquito net), bedding and funny toys. Some of these beds are even equipped with a motion sickness system with music.

A variant of such a crib for a newborn can be a special cradle, which is attached to an ordinary wooden or metal crib with the possibility of motion sickness of the baby. It is convenient to take it out, for example, to go outside.

Their main disadvantage is that, given their high cost, these models will not last longer than 6 months, since the child will simply grow out of them.

Classic model. Wooden crib

These are the most common models for both newborns and babies up to three years old. If it was not varnished, but was simply well sanded, then a more environmentally friendly option is difficult to find. The cribs equipped with casters can be freely moved around the room to the desired location. Cots on runners with loose latches allow you to rock the baby before going to bed, and with fixed ones - to set the crib firmly on the floor.

Typically, such models have a double bottom level and a standard size of 120 by 60 cm.Many of them are supplemented with drawers, which, of course, makes it more convenient to keep all sorts of children's little things at hand with a small room size, but they also make the crib heavier and make it almost unrealistic moving around the room.

Rocking beds and pendulums

The rocking chair is a traditional model, with arched skids allowing it to swing from side to side. Minus: when the baby grows up, he, leaning on the side bars, can fall out of the bed. The storage box at the bottom is low-functional: when rocking, objects in it will roll and create noise.

Pendulums can be longitudinal and transverse. They are bulky in design that can break or creak. But the model with a pendulum has strong advantages: motion sickness in them is considered less harmful than in a rocking chair, and the presence of a fixing mechanism will not allow the baby to swing independently.

Convertible bed

Such a model is suitable for practical parents who can use not only their own finances, but also the space in the room rationally enough. They are called transformers because in most cases they are equipped with additional removable pieces of furniture such as a changing table, chest of drawers or cabinets, various shelves and boxes for linen or toys. In addition, some models can be moved apart, turning from a crib for a newborn into a good bed for a schoolchild. And if you remove all the partitions and shelves, then they may well serve as a small sofa.

Among the main disadvantages is that in a couple of years this color and the bed itself can simply bother the child or significantly worsen its appearance due to the artistic or handicraft abilities of the growing child.

Crib-transformer: advantages and disadvantages - https://razvitie-krohi.ru/veshhi-dlya-malyisha/detskaya-krovatka-transformer-plyusyi-i-minusyi.html

Oval bed transformers

These models are extremely graceful - smooth, rounded shapes look very stylish. In addition, the absolute absence of sharp corners increases the safety of the product, and the baby is very comfortable inside. And such a crib takes up less space than a rectangular one.

But this is not all the advantages of such designs. They are still very cleverly transformed. A round transforming crib can become a cradle, a round playpen, a small or large (if you move the walls apart) oval crib, a sofa, armchairs with a table. Thanks to the variety, she will never get bored.

Side cot

You can sleep next to your baby, while not worrying that dad will crush him, if you buy a bed for newborns. However, the baby can sleep in it up to three years. The side wall of such a bed reclines, and the mother, without getting out of bed, can feed or calm the child. From the point of view of psychology, such closeness is useful and convenient for both the baby and the mother.

We read in detail about side cots, about the selection rules, about popular models - https://razvitie-krohi.ru/veshhi-dlya-malyisha/pristavnyie-krovatki-dlya-novorozhdennyih.html

Metal cots

They resemble traditional wooden models in shape, but can be additionally equipped with a cradle. The child does not come into direct contact with metal parts, since all parts are covered with fabric protection. Sometimes these cots can be folded out, creating a sleeping place for a preschooler. The bottom in many models has two levels, and the crib can be used as a playpen.