Britax Römer Baby Safe plus SHR II - protection from the first days of life
This car seat is designed to protect the child from the first days of life. The device belongs to the age category "0+" and is intended for very young travelers - babies from 0 to 12 months.
The Baby Safe plus SHR II carrier differs from its “brothers” in increased protection and safety. In the production of the infant car seat, the D-SIP technology was used, which provides increased protection against side collisions thanks to the deep sidewalls and a sufficiently powerful support for the baby's head.
The installation of this holding device is of particular interest. The standard equipment assumes installation with a standard car belt against the direction of travel of the vehicle.
Separately, parents can purchase one of two additional installation bases:
- Baby-Safe Izofix Base (the car seat is attached using the Isofix system);
- Baby-Safe Belted Base (the infant carrier is attached using the standard safety strap).
When it comes to the safety rating of the restraint, the rating “very good” was given by independent experts when testing the Britax Römer Baby-Safe plus SHR II on a separate Baby-Safe Izofix Base. That is, the results with a standard mount will be somewhat more modest.
Another feature of this carriage is the possibility of using it as a sleeping and walking module for a stroller. If you have a Britax pushchair, the installation is automatic. An adapter is required to connect to vehicles from other companies.
This restraint is similar to the Baby-Safe plus II car seat, the only difference is the integrated adapter for mounting on the Britax wheelchair chassis with Travel system. The adapter can be controlled using the SHR (Single Handle Release) system.
Main characteristics of the model
A country | Germany |
Mount | Carrying the Britax Römer Baby-Safe plus SHR II is attached to the car using the standard car straps. You can also use two separate bases: Baby Safe Izofix Base and Baby-safe Belted Base. These must be purchased separately. |
Product weight | 4.7 kilograms |
Latch mount | No |
Product group | "0+" (from birth to 12-15 months of age, up to 13 kilograms) |
Dimensions (WxDxH) | 44 × 65 × 57 centimeters |
Installation features | The infant carrier fits back forward like other restraints in this category. |
Internal shoulder straps | 5-point, there are soft inserts, there is a system for adjusting the height of the inner straps. |
Chair transformation into booster | No |
Mounting Features The infant carrier is installed with its back forward, like other restraints in this category.
The inner straps are 5-point, there are soft pads, there is a system for adjusting the height of the inner straps.
Design features
Side impact protection | Yes |
Adjusting the headrest | Yes, 7 positions |
Backrest adjustment | There is |
Removable cover | Yes |
Anatomical insert | Available for newborns |
Extra features
Side impact protection | Yes |
Adjusting the headrest | Yes, 7 positions |
Backrest adjustment | There is |
Removable cover | Yes |
Anatomical insert | Available for newborns |
Security issue
The Britax Römer Baby-Safe plus SHR II seat for newborn babies and babies has a high safety record, which should be discussed in more detail.
A unique development, which we have already mentioned briefly, is the D-SIP technology. This small device is located on both sides at the base of the car seat carrying handle.
On an onboard impact, the D-SIP system will operate instantly, returning most of the impact energy back towards the door and gradually distributing the remainder over the seat shell. The result of the system will be to minimize the negative impact of the shock wave on the child.
Supports baby head and neck headrest, which can be adjusted in seven positions. The headrest also rises and falls with the internal harness straps to create an optimal position for the child.
In addition to a high degree of protection in side collisions, the car seat is characterized by an increased ability to withstand the energy of a frontal impact. Good performance is ensured by the back-forward mount and 5-point internal safety harness.
Once again we will repeat the most important information - maximum ease of use and safety is provided when installing a car seat on the Isofix base. However, even with a standard belt mount, you don't have to worry about the health of the young passenger.
ADAC crash test results
The independent tests of the Britax Römer Baby-Safe plus SHR II child seat, carried out back in 2011, once again demonstrated that the European company pays special attention to the safe transportation of the child, both in frontal and side impacts.
In general, the ADAC experts found this product to be quite reliable and comfortable, but they also added their own recommendations for care and installation. Experts advise to monitor after installation the degree of adherence of the seat back to the passenger seat.
Even a small play between the back of a car seat and the car seat body significantly reduces safety performance. That is why it is extremely important to secure the holding device in the passenger compartment as tightly as possible.
Benefits | disadvantages | |
---|---|---|
Safety |
|
|
Operating comfort |
|
|
Ergonomics |
|
|
Taking care of your device |
| |
Sustainability |
|
Advantages and disadvantages of the device
Despite the extremely positive reviews from experts on crash tests and laboratory tests, the opinions of parents about this infant car seat are rather ambiguous. On the net you can find both enthusiastic words and extremely negative judgments.
What are the advantages of this child seat? The main advantages:
- several options for attaching a device for transporting a baby;
- high indicators of reliability and safety, compliance with all European standards;
- five-point inner strap with softening inserts and a single tensioning system;
- the ability to adjust the backrest tilt, which allows you to give the seat the most horizontal position, which is extremely important during the newborn period;
- technology of simplified installation of the cradle on a wheelchair chassis, and the module is automatically installed on Britax devices;
- the handle for carrying the product is made of a special non-slip material;
- the restraint is approved for use in air transport, which means parents can take it on airplanes;
- there is an awning that protects the little passenger from the sun's rays (high protection against ultraviolet radiation) and wind, which is especially important when using the chair as a cradle for a stroller;
- the inner and outer lining can be easily removed and machine washed with a delicate cycle.
Users refer to the following design features as negative ratings:
- despite the presence of an anatomical insert and a change in the position of the back, many parents note an excessively vertical position of the baby;
- cramped cradle, which is especially noticeable if the child is large or dressed in winter clothes.
In addition, you can often hear that this car seat is very expensive. The average price in domestic stores is 22,300 rubles, which is really quite expensive for a 0+ category holding device.
How is the infant carrier installed?
The most detailed information on installing the Britax Römer Baby-Safe plus SHR II carry cot can be found in the official instructions in Russian. We will present the main actions that parents need to take to properly install the product.
- The baby is seated in the cradle, fastened with internal straps (a characteristic click should be heard in the lock), then pull the straps so that they fit snugly against the child's body.
- The seat with the child is installed on the desired seat with the back forward (the child looks back). The vehicle belt is guided over the top of the device and fastens in the corresponding buckle
- The belt is inserted into the blue guides on either side of the seat, then tensioned and pulled over the head of the seat. It is secured with a blue holder.
- The next step - from the side of the machine door, the D-SIP folds up, you need to wait for a characteristic click. If the seat is installed in the middle seat, then the side protection does not need to be folded back.
Above, we examined the standard type of fastening of the holding device. Mounting options are also possible using a belt base and the Isofix system. These methods are well described in the instructions supplied with the car seat.
Where to buy the Britax Römer Baby Safe plus SHR II?
There are several options for buying transportation for babies. Every day more and more parents prefer purchasing car seats and other children's products in online stores. Let's consider the most reliable online platforms.
Car seat group 0+ (up to 13 kg) BRITAX ROMER Baby-Safe Plus II SHR
As a summary
The Britax Römer Baby Safe plus SHR II is one of the safest, most comfortable and ergonomic infant carriers in its class. This is confirmed by numerous independent laboratory tests.
However, the reviews of direct users - parents of babies - are very ambiguous: from extremely negative assessments to laudatory "panegyrics". Should you buy this carrycot? This should be decided by moms and dads themselves after weighing the strengths and weaknesses of the car seat. Happy shopping!
Article rating: